Double Glazing Lock Repairs
Quality locks on your windows and doors can stop burglars from getting into your home. In general, they don't enjoy breaking glass or squeezing through open windows.
Some double glazing owners, however, have experienced problems with their window or door lock after the installation. Luckily, these problems are usually fixable and don't require to buy new double glazing.
Broken or Faulty Locks
If your uPVC door or window lock is broken or faulty and requires a locksmith, they can fix it. They can fix hinges, striker plates and locks for double-glazing. They can also adjust the cylinder in order to fix any misalignment that could be causing your handle to function properly.
The mechanism may be locked when the key is inserted into the lock, but it will not turn or is difficult to insert. Dirt or grease can get stuck in the mechanism. If this is the case, it might be possible to clean the lock and lubricate it. It is important to make use of a dry lubricant such as teflon or graphite instead of oil which attracts dirt and stick to the interior of the mechanism. After lubricating, insert the key into the lock and turn it. The lubricant should make its way through the mechanism and the lock should be able to turn easily.
A faulty lock can also be caused by loose screws within the lock mechanism. They can become loose and fall out, or even break off completely preventing the lock to work properly. These screws can be tightened with a screwdriver, but you must be cautious not to tighten them too much. This can damage the internal components.
A faulty lock can be dangerous for both you and your family members, particularly if you have young children. It can be easy for them to open the door without you knowing and give them access to your home. If you're concerned that this might occur, a professional locksmith can assist you secure the double-glazed doors.
Misty Glaze is a professional uPVC company in Lancing that repairs all types of damaged and broken mechanisms on uPVC windows and doors. We can also alter your uPVC or double glazing locking system to meet your specific requirements, meaning that in a lot of cases replacement windows and doors are not necessary.
Handles that are damaged or broken
As part of their overall security plan, many double-glazed windows have a multipoint lock. This is an excellent option for those concerned with criminals who are looking for ways to gain access to your home. Ask your locksmith for antilift locks. These can be installed as an addition to the existing locks and will help keep your windows firmly shut.
Handle locks can be damaged or fail. They are the first part that a criminal will utilize to force open your window. Luckily, the good news is that this is among the most straightforward parts to repair.
Modern uPVC handles and aluminum handles are equipped with the multi-point locking mechanism referred to as Espagnolette that is designed to ward off forced entry. This security upgrade is often provided as an additional option on new uPVC window installations. Older style uPVC and aluminium handles can be upgraded to shoot bolt locking systems also as an optional option on double-glazed window installations.
It is important to repair a handle as soon as you can if it's damaged. The damaged handles could stop the window from closing properly and allow a draft to enter. It could also be a vulnerability that thieves who are opportunistic could take advantage of and put the belongings of double glazed window near me your family and you at risk.
The process of fixing the damaged mechanism begins with gaining access to the window frame and removing the broken handle. The gearbox is then opened to determine the kind of gearbox used to open the handle. This allows a replacement that matches the profile and internal window frame mechanisms.
Once the mechanism has been replaced, the handle can be fixed using the original screws however, we usually recommend replacing them with larger ones since this will provide a more secure fit. The final step is to apply a coating of clear sealant to shield the handle from further corrosion. Once that's done, your window will be functional again and at a fraction of the cost of replacing the entire window.
Hinges that are Broken or damaged
If your windows don't close correctly, draughts may get in, your home's security barriers will weaken and you run the risk of water damage or damp. Window hinges that break or become faulty are a common occurrence and can be easily repaired.
If your windows made of uPVC won't open or shut it's likely that the hinges require to be repaired or replaced. A lot of window manufacturers will require you to purchase an entirely new window unit to fix this simple issue, but we are able to replace the hinges double glazing near me to save you money.
Window hinges can be damaged by repeated use, or weakened over time by corrosion. If you've broken a window hinge, it's crucial to take the necessary precautions to prevent further damage. This includes not forcing the window to open or close.
Identifying your hinge type will help you identify the right parts to repair it. Maco, Mila and Roto are all brands of window hinges. Get advice from a professional before purchasing parts that will not fit into your existing hardware. This can result in more damage.
A damaged hinge can be a big issue for your uPVC window and doors. They can be a major source of noise and can also allow water to get into your windows.
To fix this issue, first check that the pin barrel on both sides of the hinge is double glazed window near me aligned. If it isn't, tap the head pin using the hammer to create a small bend in the barrel of the hinge. This will hold the pin in its place. Have a person hold the doors while you click here remove hinge screws and hinges. Replace the hinges using those that are of the same size, and then attach the screws using glue. Finally, while the glue is drying, secure the hinges using clamps or weights.
After you have fixed the hinges, you can reinstall the door. You can also reattach the handle. Replace the screws using wood dowels of the same length as the screw that was used to ensure that they match.
Glass that is Broken or Faulty
While uPVC windows do a great job of keeping cold out and heat in, they are susceptible to becoming damaged over time. This can include broken or damaged glass as well as defective locks. This is an issue that can be costly should it be left unattended. It also can detract from the aesthetics of your home and could lead to a loss of insulation, so it's important to repair any damage as quickly as possible.
You can fix your cracked glass by yourself if your have the right tools and techniques. First, make sure the surrounding area around the glass is clear so that any shards don't injure anyone and aren't a trip hazard. After that, take away any broken glass pieces and dispose of them in the appropriate manner. Apply masking tape over the entire area. This will stop glass fragments from sticking to your skin and splintering when you move them. If you're dealing with a double-pane window it's a good idea prepare the glass before gluing it back into place so that you know you'll have enough space complete the task.
Before applying the glue, wipe the surface of the damaged frame and the glass with an unclean, double glazed windows near me dry cloth. Follow the directions for application and curing times that can differ from one product to the next. You may need to clamp the cracked glass using clamps that are lightweight and designed to hold fragile materials, based on the angle.
Once the adhesive is fully cured, carefully reinstall the glass inside the window frame, ensuring it's flush with the edge of the frame, and there are no gaps between the glass and the window sash. Be careful not to bend the glass when you put it back in place, as this could weaken the seal. This could lead to water infiltration or condensation.
Contact a professional glazier, such as O'Brien(r) for a replacement if your glass window has been completely broken. It's crucial to act fast in the event of broken glass.